River WIP

well... almost done really...

As ever, looking for stuff that fits handily into A4 paper boxes (in this case a box for A4 label sheets), and as I've limited gaming space, confining myself to 3 or 4 foot square, a side/corner piece made more sense than having something run through the middle... I was quite impressed with Wirelizard's river banks over on LAF. Great idea... so I nicked it...

The three sections are a bugger to photo though, the above is the best I've managed (click pic for a bigger one)... I've added some marks on the photo to show where the joins are, but there are two peices the length of a sheet of A4 and a shorter peice... if necessary, the wooden dock/reinforced bank can be left out for a shorter section, if left in it should be enough room for my Dwarf longship if I ever get progressing with that, or any combo can be a handy entrance point for Sea Devils (again if I catch up with those)... the exposed bank is made from torn cork tile, nice and bitty and looks the job... the grass by the dock has some tracks in to show wear... I had gone with a patchier look all over, but when I did some test shots on my gaming tiles, just looked silly... by adding grass in those patches it has left faint thin patches of bare earth which looks more like the field/riverbank look I wanted so result...

The river itself could do with darkening... annoyingly, the reeds look the same colour as the grass, should have used the paler ones, so may give them a lick of paint to lightenen them up... and of course the water surface needs lots and lots of gloss to look watery... I did look at various ways of doing waves and so on for the surface, but as I want to add the longship at some point, it would be better just flat... also a removable/seperate jetty is on the cards...

I'll try and get some better photos at some point/when finished, but I wanted to get something up this month and move on to a long planned Who project...

Salute 2011

a good day, if long day, back at around 10.40 last night... three Frother's games and there seemed to be a lot of interest... the mansion in all it's glory, the first game was a bit slow, but the rules were trimmed back and the later games went better...

the mansion game together really well, especially considering how scattered around the UK the contributors are... of course, Akkie's Battlefield game was just one chaps efforts and was outstanding to look at...

the Tron game, oddly only got one pic of that, but it was genius in it's simplicity and won an award...

and Crooked Dice launched 7TV rather spectacularly... table looked great...

even down to the scale map of the table in the villains lair...

CD also had a Who game going...

other stuff included a nice looking VSF Aeronef game and a few ECW games (which considering my recent dabbling was nice to look at)...

Witch Hunter WIP

post-Salute-build, pre-Salute motivation means he now has hair...

after several attempts since January, I quite like that... gave up on windblown and went with long and a bit of chin hair... quite a relief to get the Library out of the way... sigh

the library at Cthluedo Mansion finished

it's finished... well it's done and I'm stepping away from it before I cock it up in a spectacular fashion...

the table is scratch built from foampvc and beads for the legs (not that you can see them very well, but they look bloody great) and the books/cthulhu idol mark out the spaces on the floor so players can climb on/over it as they wish... the wallpaper on the outer walls will tie this room in with all the others (that's the plan - as ever the Frothers build doesn't come together until the day) with some suitable staining... I had planned on putting some Mythosy pictures, but they haven't turned up, so have used the ones the frames came with as most could pass for sinister in some way... removed 1 picture though to help fill the walls up with removed portraits... not 100% sure that has worked very well though... hey ho...

the library at Cthluedo Mansion part 5

I never want to paint another book in my life... sadly I have some more to do for the table... if I can bring myself to do them... sigh... oddly, the photos make it look much brighter than it is, but the basic room is done, just the corridor side walls to finish and to put in the windows to have a playable room... everything else, including the table is just gravy at this point as I'm quite sick to death of the bloody thing...

and in a desperate attempt to add a bit of Mythos to it all, a Mi-Go brain jar on the shelves:

the library at Cthluedo Mansion part 4

the library walls/shelfs are painted, the massive table is as well, but still deliberating over the floor. While I ponder that, Salute gets closer and I need books... lots and lots of books for the library walls...

I'm using bought metal books for those out on the table and strewn about the room, but all I need for the shelves are spines. Now there are essentially two different sizes of book shelf in the room, the mid-wall case and the corner case (which is slightly narrower) and after some quick playing with 3mm pvcfoam, I need 15 books to fill a shelf in mid-wall case and 12 books for a shelf in the corner case... and there are 5 shelves to a case... that should be around 1750 books. No way was I making those by hand.

I made some blocks of books out of foam pvc, 8 different 5 book blocks and 2 different 7 book blocks (henceforth refered to as bb)... that meant 140 x 5bb and 50 x 7bb to fill the walls... much more manageable, so out came the Siligum and the Alumilite Super Plastic:

I did a few molds to optimise the resin when mixed, but was bricking the actual resin bit. This is chemistry. This is chemistry with warning labels. Scary chemistry. Only it turns out it isn't...

Some deliberation over the need for well ventilated and room temperature while being a very cold March, I ditched the garden, turned up the heating and opened all the windows... it's not exactly room temperatue, but warmer than the garden, this has had the downside of slowing down the curing time a smidge (3 minutes normally), but this means I have slightly longer to pour. I've had to limit my mixing to a quarter of a fluid ounce, as any more caused problems with the tin foil cake cups I planned on using for the mixing pot... large amounts caused the foil cups to buckle, making pouring a pig. I will get some plastic cups later, but it means for now I do half the molds at a time, one lot is curing while I mix the next lot which seems to be working so far. I've also got some spare for the Timelord wall sconce when needed.

Now, I have a new found respect for mold makers, it turns out the hardest part of the entire process is getting a decent mold in the first place... I must confess I've had to ditch a couple of my earlier molds, simply because of flaws, I'm getting better at it though, but it was an expensive (if fun) learning curve... what I have now still have some flaws, but all I need are good spines, the rest of the books will not be seen...