the trusty quarry...
now, I had one main limiting factor with this - space... I ain't got much...
so the first consideration was storage - as I can easily get hold of boxes that used to contain reams of A4 paper, the quarry will be based around a footprint of a sheet of A4, it can (and will) be smaller than a sheet of A4, but everything should nestle in together nicely...
next of course came the look of it, and what choice... rock quarries, sand pits, gravel pits... and yet, oddly, I do have a favourite quarry and what a quarry it is... half of pre-War London is built from it, it was a WW2 naval installation and starred in Doctor Who twice and Blakes Seven once...
Winspit in Dorset...
http://www.doctorwholocations.net/locations/winspitquarry
great massive blocks of stone that doubled as Skaro, Atlantis and Mecron II
now I'm realistic enough to realise it's not going to be a rock for rock, crack for crack match up... especially with the in a box requirement, so I wouldn't bother with the Skin Room cave, concentrating on the North Front area and the massive outcrop that hides the Skin Room... this area should give me a nice corner terrain piece, which can double as an abandoned Skaro, a Silurian shelter on Earth and (with a bit of dressing) a Dwarf mine...
so, after much playing with paper cut outs I had a plan...
the plan was, of course, completely flawed...
aside from what you see there, there is an end piece which trails off to the table edge (similar to the entrance to the real quarry) and plans for 'in table' pieces so this rock wall doesn't just spring from no-where...on reflection of it at that stage (you're looking at 2 A4 long pieces, one an L shape A4 wide) I realised that the distance between the long open cave and the smaller central cave was too short, similarly the distance from the corner to the central cave as also too small... even allowing for my fudging for gaming/storage, it looked wrong...
so foam was cut and swapped about and the central cave got a section of it's own, the L shape was lopped down.... the resulting 'wall' is now 2 foot long from corner to end of the long thin cave section... which is a happy coinkydink for future plans... I've made the central cave taller than in real life as well, so, well, tall things can exit safely...
the corner section is midglue so declined this photo opportunity...I reckon, to reflect the cliff face, it needs at least another 3-4 layers of the 25mm thick foam, with some more 5mm layers added in for some variety...
