Wednesday 4 June 2014

old toy new life WIP part 2

well, technically part 2 at any rate, it just needed a catchier title...

Ok, the rooms within the base unit are done, walls thickened up slightly, some card down to hide various out of scale bits removed. All of the walls are at a slight angle, which makes things less boring, but means I have to get the doorways just right - and have just about managed it I think. Computer banks from Ainsty, which fit in quite nicely, the remaining corner will have swappable units I think, so it can vary what research/experiments might be going on...


The other room has had walls raised slightly to match the first room (and extended some of the exterior detail as well to cover the new wall), and again a door added. Again, the slant on the walls makes things tricky and this entrance had less available wall space to play with, so to make the removable door ended up with some very narrow strips of card to allow for the running grove - both doors should be the same size, but this one is a little tighter so has been sanded down on the edges a bit...


Much liquid g/s has helped hide any joins and blend stuff in. So far this is working quite well...