Imperial Landing Craft

Still plodding away at otherstuff as and when the moods strike (even dug the Quarry out a couple of weeks ago), and been taking advantage of some good prices on eBay in order to get some more ships for my Star Wars fighter scale stuff...

The Titanium Imperial Landing Craft fits in just about at that rough fit scale I want - it is better with the Titanium Falcon, as it should be slightly longer than the Falcon, but my attempts at tarting that up haven't really led anywhere, and the D'Agostini was always the nicer model...

In the background is a play around with the Micro Machine TIE Bomber - I did find a forum somewhere that went into great detail about the TIE Shuttle briefly seen in Empire Strikes Back, and with a lot of convincing evidence about the flipped wings. Annoyingly, I didn't bookmark it. Anyhoo, I had two MM bombers, so used the cockpit module from each one (never understood why the shuttle wouldn't have a window for the passenger module) and flipped the wings. It looks ok, but may not get much further - I have the D'Agostini Imperial Shuttle which is a good scale match (although guns need repairing after the really heavy paintjob was stripped).

wood for the trees and other vistas

ok, excuse the poor photos (colours really aren't being done credit), but have finally got stuff to stick to the sodding trees... it looks much more blended in real life, but job done (finally). The big trees sadly just didn't work, tried and tried to get them looking as I intended and just couldn't - so chopped them down and used the bases for thickets (as I was very happy with the bases), these are a good solid line of sight blocker, and will be doing some smaller ones as well to help make a more overgrown woodland-ish look. The new and improved foliage of course meant I needed to redo my bushes, so the hillfort and other bits of undergrowth have been redone to match the thickets, again, photos don't really do it justice... but as I said, more bits are in progress as I've run out of Burnt Umber.

 as the trees were to big to really get in the light tent, the board came out, which then dovetailed into a request someone on Frothers made to see it all, so above is the woodland in progress, with stone circle and hillfort, and below is the coaching inn, the blacksmiths and the two houses...

this has been surprising useful in that it fills the area better than I had thought - I have two more 2-storey houses to build which should about do it, along with some little bits for flavour (a well and some mud/dirt roads/townsquare), plus of course I still want to do a church and graveyard as a 3rd option (none of which yet exists). Also unseen is the river side which would roughly fill the bottom corner area above, and numerous hedges I built ages back when I was working to fill a larger area, plus some drystone walls from Fenris Games.

I know I plod along at this and am easily distracted, but am quite chuffed looking at it how good it's coming together... even if I do say so myself.

gatehouse WIP 2 - gates

 gates for the gatehouse, scratchbuilt using the Tudor Wall Panelling from Fenris, they still need hinges fitting, but are pretty much done... as I was at it I did a 2nd left side gate with a wicket door just for variety - I say left side, but the design means I can flip them around and mix it up (the wicket door just opens inwards on the left side), so I can have the peephole and plain door, peephole and wicket gate, plain and wicket gate, and so on...

the wicket gate door itself does need a bit more work - this is my 3rd attempt, just doesn't seem to work right... hey ho...

gatehouse WIP

a bit of a build for February... a gatehouse to go alongside the manor house to help vary it up a bit and as a start to a coaching inn type courtyard... I had hoped to be further along with this one, but a bug swept the office and I've been playing alot of Fallout: New Vegas...

anyhoo, the side piece is designed to slot on over the chimney at the end of the manor house like so:

it's a bit more fanciful than the main house, but I've tried to give it a bit of character to match the vague idea of phases of build (with the manor house having a newer wing attached to an older converted hall), so they've used the remains of an old watch tower and added a timber frame on top - once the timbering is done, there should be sense of stone work trimmed and patched to fit the frame in places... in time, with additional pieces I can have a decent coaching inn yard with stables and maybe even a fortified manor house, depending on bits made and used...

I'd toyed with several uses for the new building, but space restricted any stairway, so I had to use a ladder which changed it a little bit in my mind... so I could still make the most of the thinner room over the gate, I figured a loft door would look nice enough and the whole top floor can be just used as storage, which will make furnishing easy, with maybe a merchants desk on the raised ground floor.
 

the front has an overhang on the older stone base, figuring if you could get a little more floor space you would... as I said, a little more fantasy perhaps, but I'm quite happy with it so far...

the Gabriel Hounds

Some supernatural beasties that have been planned for a while, but I needed the right canine body. Gabriel Hounds (also called Gabble Hounds for the noise they make as they fly across the sky - which was probably just geese) are said to be born by the death of unbaptised children and have the heads of humans. The heads in this case are from the werewolf head sprues from Maxmini, the wolf body is from MiniatureMojo's Scavenge Skirmish Survive range - they have 3 different types available, but I prefered the hunched pose.

Not my best paint jobs, I hate doing fur as it never allows me to blend like I normally do, plus I wasn't happy with the white (definitely need to buy the very intriguing White set from Andrea Color). And they had to be white according to legend, with red ears - I had planned on blending the ears in to the white, but the fur around the heads put paid to that.

If I ever get the chance to do an Akula and get my own mini's made up, these are the first things I'll have made...

At The Muppets of Madness

A thought popped into my head as I was painting this Faceless Horror from Reaper and it kind of ruined it all for me... what should be a writhing mass of teeth, eyes and pseudopods suddenly took on the air of a singing Muppet... I think it's the teeth...

so many singing mouths... mind you, in true Lovecraftian style, painting it will drive you mad as you keep finding one more sodding eye.